Installing Unigraphics NX 2.0

Please complete all of the pre-installation procedures from the previous sections before
continuing the installation.
For online help during the installation, press the F1 key. To exit the install, press cancel.
Installing Unigraphics NX 2.0
Please use the following instructions to perform the installation:
1. Log onto your workstation, using an account with Administrator privileges.
2. Place the Unigraphics NX 2.0 CD into the CDROM drive on your system and select
the Unigraphics NX 2.0 installation option.
3. At the Welcome dialog, click Next to continue. Clicking on the Cancel button at
anytime during the installation will discontinue the install.
4. Select the desired installation type: Typical, Custom or Configure a Mapped Drive.
These options are defined as follows:
• Typical
All Unigraphics NX 2.0 products (Base and Options) will be installed. Plotter
services, registry entries, shortcuts, and system files will be configured for
Unigraphics NX 2.0.
• Custom
By default, only the main UGII kit is selected for this type of installation. You
will be able to select additional products that you wish to install. Registry entries,
shortcuts and system files will be configured for the selected products. The
plotting service (ugiipqd) will be configured if the plotting product is selected.
• Configure a mapped drive
Use this option to configure Unigraphics NX 2.0 to run FROM a mapped drive
location where it was previously installed on a server. This allows you to run a
“shared” copy of Unigraphics NX 2.0 located on another machine.
This option is NOT designed to fix a previous installation of the product.
Use the “Repair” or “Modify” options to fix or change a local installation.
5. Enter the destination directory path or accept the default directory path provided. The
installation will create the directory if it does not exist. Click the Browse button to
change the destination location.
6. Select the runtime language. In the language selection screen you may choose the
language to be used by Unigraphics NX 2.0 at runtime, to present menus and text.
This selection will set the %UGII_LANG% environment variable which may be
changed at a later time or set differently for different users.
7. Enter the name of the license server(s). In the license server screen, you will be asked
for the server name(s) of the machine(s) that supply licensing information for running
Unigraphics NX 2.0. This may or may not include the nodename of your local node
(the computer running this installation). The nodename(s) of the license server(s)
should be entered in the form "27000@nodename". This selection will set the
%UGII_LICENSE_FILE% environment variable which may be changed at a later
time. See the Unigraphics NX 2.0 FLEXlm User Guide for information on more
advanced settings such as redundant servers.
You must install the Unigraphics NX 2.0 FLEXlm kit IF you specify your
local node as a license server. This may be done before or after this installation.
8. The final dialog is the Setup Confirmation screen. Verify your installation selections
before proceeding to the file copy sequence. To change any settings, use the Back
button to navigate back to the appropriate installation dialog.
Upon the completion of the file copy process, the installation procedure will configure
Unigraphics NX 2.0 to run on this machine. At the conclusion of the installation, Unigraphics
NX 2.0 will be ready to run and selectable from the Start Menu.

Unigraphics NX 2.0
Installation Guide
for Windows
Electronic Data Systems Corporation
10824 Hope Street
Cypress, CA 90630
www.eds.com

Berbagi :